Influence of non

Scientific Reports volume 13, Article number: 407 (2023) Cite this article

794 Accesses

2 Citations

1 Altmetric

Metrics details

Enhancement of the heat transfer rate inside the double pipe heat exchangers is significant for industrial applications. In present work, the usage of non-uniform magnetic field on the heat transfer rate of the nanofluid flow streamed inside double pipe heat exchangers are comprehensively studied. Computational technique of CFD is used for the visualization of the nanofluid hydrodynamic in existence of the magnetic source. Influences of the magnetic intensity and nanofluid velocity on the heat transfer are also presented. Simple algorithm is used for the modeling of the incompressible nanofluid flow with addition of magnetic source. Presented results show that magnetic source intensifies the formation of the circulation in the gap of the inner tube and consequently, heat transfer is enhanced in our domain. Comparison of different geometries of tube reveals that the triangle tube is more efficient for improvement of the heat transfer of nanofluid flow. Our results indicate that heat transfer in the tube with triangular shape is more than other configurations and its performance is 15% more than smooth tube.

The management of the heat transfer process is significant for the development of recent engineering and industrial systems and devices1,2. There are several techniques and materials for isolation have been used and presented in recent years. Although heat transfer reduction is easily accessible by using isolators, heat transfer improvement is not easily achievable due to limitations in materials. Meanwhile, heat transfer improvement is more required in industrial and engineering instruments and devices i.e. heat exchangers, and condensers3,4. The importance of efficient heat transfer has motivated mechanical engineers and researchers to find new solutions and materials which increase thermal transfer in industrial applications5.

The application of fin is the most conventional approach which is widely used due to its simplicity and low cost. In this methodology, the contact surface area of the heat source with the outside is increased by adding a fin adjacent to a heat source6,7. Although several papers investigated this technique for the heat transfer rate, the efficiency of the heat transfer via fin is limited. The shape effects are also considered an old-fashion method for heat transfer enhancement8,9,10.

The main revolutionary in heat transfer is achieved by the addition of nanoparticles to the base fluid. In fact, the existence of the Ferro particles inside the main fluid extensively augments due to Ferro characteristics of the fluid mixture11. The addition of Ferro Nano-particles improves the heat capacity and thermal conductivity of the fluid mixture and this increases the heat transfer efficiency in heat exchangers in real applications12,13. Theoretical investigations of the nanofluid heat transfer have been widely done to obtain efficient condition. In the last decades, the advance in computational fluid dynamics enables scholars to model and simulate nano heat transfer modeling in complex and real industrial devices14,15. These researches have presented significant results about the mechanism of heat transfer of base fluid with nano Ferro particles in different processes in melting and boiling phenomena. They also investigated phase change materials PCM via CFD methods with/without nanoparticles16,17. These investigations have revealed various aspects of the nanofluid in industrial usage18.

The application of the magnetic field also considerably boosts the heat transfer of the ferrofluid due to exerted force on Ferro particles of the nanofluid stream19,20. This type of problem is mainly divided into two main parts: uniform and non-uniform magnetic fields. Although the efficiency of the uniform magnetic field is more non-uniform, the production of the uniform magnetic field is an almost challenging task and requires enough space. Besides, its cost is more than the non-uniform magnetic field which is obtained via the existence of the wire with AC/DC current. With the simplicity and lower cost of the non-uniform magnetic fields in industrial applications, this topic is attractive in thermal engineering science21,22. The experimental investigations of the non-uniform magnetic fields have been presented in limited research since the measurement technique of heat transfer in this specific condition is a tough task23,24,25,26. Unlike a uniform magnetic fields, the simulation of the non-uniform magnetic source requires high skill for the implementation of the source term in the main governing equations in the modeling process27,28,29,30. There are limited investigations that reported the ferrofluid stream in the existence of the non-uniform magnetic field. In this study, the simulation of the water stream with nanoparticles is investigated in the existence of the non-homogeny magnetic field as displayed in Fig. 1.

Investigated models.

As displayed in Fig. 1, the Ferrofluid is used as a coolant for heat transfer from the hot air stream moving in outside tube. In the hot stream, there is a wire which is the source of the magnetic field for heat transfer improvement inside the ferrofluid. This study tries to visualize the impacts of the non-uniform source of magnetic field on the heat transfer performance of shell and tube heat exchangers. Although this type of heat exchanger is the most convenient one and has been widely investigated31,32,33,34,35, the performance of this type under the impact of the non-homogenous magnetic field was not fully discussed.

In present work, comprehensive researches are done to disclose heat transfer efficiency of ferrofluid in the presence of the magnetic source near the shell and tube heat exchangers. Computational approach of CFD is used for the simulation of the hydrodynamic and thermal characteristics of ferrofluid in different operational condition. The influences of magnetic source and ferrofluid velocity on the heat transfer efficiency are presented. The different geometries of the inner tube are also investigated in this article. Temperature variation of ferrofluid along the tube is demonstrated and compared in various conditions.

Figure 1 illustrates the schematic view of selected model for our investigation. As presented in this figure, the hot air transfers from the outer domain (shell) while ferrofluid is moved counter currently from inner tube (d). There is a wire inside the shell to produce magnetic field for heat transfer improvements. Different shapes of tube are investigated in the present work. To achieve reliable results, 3-D models of selected geometries are chosen. The existence of wire generates the non-uniform magnetic field as displayed in Fig. 2. In the subsequent section, the influence of the magnetic fields on the flow structure would be explained in details.

Distribution of non-uniform magnetic field by wire.

Figure 3 demonstrated the applied grids for the selected models. The structured grid is produced in the chosen 3-D models as displayed in this figure22,23,36. Grid studies are also done by examining various grid size and resolutions and results of non-dimensional temperature are compared in Fig. 4. Presented results indicate that the fine grid (54 × 54 × 220) is acceptable for the future investigations.

Applied grids (a) 3-D view, (b) cross section.

Grid study.

Since the base fluid for the nanofluid is water, solving RANS equations with energy equations would results in reasonable results34,35,36,37. For the simulation of the magnetic field, the components of the magnetic field must be added in the source term in the momentum equations. It is supposed that the impacts of magnetic fields on the nanofluid properties are minor, and the Lorentz force is not substantial in the momentum equations in comparison with the magnetic force by reason of the electrical conductivity. Hence, the ultimate equations for our models are as follows:

The term \({F}_{K}\left(x\right)={\mu }_{0}M\frac{\partial H}{\partial x}\) and \({F}_{K}\left(y\right)={\mu }_{0}M\frac{\partial H}{\partial y}\) are component of Kelvin force signify the incidence of the magnetic gradient in chosen domain. are the components of Kelvin body force in the x and y directions, respectively. Hx, Hy are the components of the magnetic field in the x and y directions are determined as follows:

In present, the SIMPLEC algorithm is used with the second order upwind numerical scheme38,39,40. This algorithm is a normally used in Computational Fluid Dynamics for solving the very Navier–Stokes equation's. The algorithm follows the same steps like the SIMPLE algorithm with a little variation that the momentum equations are manipulated which allows SIMPLEC velocity correction equations to omit terms that are less significant than those omitted in SIMPLE. Moreover, finite volume computational fluid dynamic code is used to resolve governing equations and the facts of the code are completely clarified in preceding articles.

Applied boundary condition for the chosen model is also displayed in Fig. 1. The inlet velocity of ferrofluid is equivalent to the Reynolds number = 80, 100 and 120. The air stream velocity is equivalent to the Re = 1500. The properties of the ferrofluid, air and gas are presented in Table 1. Fe304 nanoparticles with 4% concentration is mixed with base fluid for the production of the ferrofluid.

Comparison of the achieved results with experimental work is known as validation and it is significant step in the computational study and simulations. The heat transfer analysis of the pure water (Re = 1620) in single tube with constant heat flux are done and presented in Fig. 5a. Our comparison indicates that our results agree well with that of Kim et al.41. Comparison of the selected model in presence of TiO2 nanoparticles (24%) are also done with experimental data of He et al.42 (Fig. 5b). It is found that deviation of our results with experimental study is less than 7% and it is good agreement.

Validation1.

Comparison of the nanofluid streamline without magnetic field for the selected models are presented in Fig. 6. The circulations are produced in existence of the cavity inside the domain. The size of the circulation is pronounced in the model with sinusoidal wall. The formation of these circulations results in the separations which augment the heat transfer between wall and nanofluid stream.

Comparison of streamline.

The influence of the non-uniform magnetic field on the structure of the nanofluid streamline is demonstrated in Fig. 7. As noticed in the figure, the circulation is split into two sub-circulations which would increase the heat transfer. The influence of the magnetic field intensity on the variation of the temperature inside the smooth tube are displayed in Fig. 8. In this model, Reynolds number of the nanofluid stream and air are 80 and 1500, respectively. It is found that the increasing of magnetic intensity enhances the thermal boundary layer into the center of the tube. Besides, the impact of the streamline is more pronounced on the temperature variation on the cross-section of the tube.

The flow stream in the mid-section of the tube in existence of the magnetic field.

Contour of non-dimensional temperature in the mid-section of tube (a) Mn = 0, (b) \(Mn=1.088\times {10}^{6}\), (c) \(Mn=2.22\times {10}^{6}\), (d) \(Mn=3.47\times {10}^{6}\).

Comparison of the Nusselt number along the selected geometries under effects of non-uniform magnetic force with different intensities are displayed in Fig. 9. It is observed that the variation of the heat transfer is directly proportional with the shape and size of the circulation in these cavities. Besides, the intensity of the magnetic field enhances heat transfer inside the tube. Comparison of the maximum and minimum value of Nusselt number shows that the sinusoidal and square shapes have highest fluctuation in the heat transfer. It is also observed that application of magnetic field with Mn = 3.47e6 increases the maximum local heat transfer up to 30%.

Distribution of the Nusselt number along (a) simple, (b) sinusoidal, (c) triangular, (d) square tube in presence of different magnetic intensities.

The influence of the inlet Reynolds number on the local Nusselt number are plotted in Fig. 10. Obtained results shows that the heat transfer rate is reduced with periodic cycles along the tube. The maximum heat transfer value happens in the section with lower area while minimum value noticed in higher section area. In fact, this is mainly because of the higher velocity of nanofluid in the section with lower surface area. The impacts of inlet velocity are noticeable in maximum Nusselt number. Meanwhile, in the high Reynolds number, the location of the initial separation moves into the upstream.

Distribution of the Nusselt number along (a) simple, (b) sinusoidal, (c) triangular, (d) square tube in presence of different inlet velocities.

The influence of magnetic field on velocity distribution in the mid-section of tube are demonstrated in Fig. 11 for Ren = 80 and Rei = 1500. Achieved contour indicates that velocity distribution become more uniform and nanofluid velocity near wall increases when intensity of the magnetic field is high. Besides, maximum velocity value in the center of tube is decreased in high magnetic intensity.

Contour of velocity in the mid-section of tube (a) Mn = 0, (b) \(Mn=1.088\times {10}^{6}\), (c) \(Mn=2.22\times {10}^{6}\), (d) \(Mn=3.47\times {10}^{6}\).

The temperature variation of the nanofluid flow for different magnetic intensities and tube shapes are illustrated in Fig. 12. The variation of the temperature indicates that the main impact of the magnetic field is on the temperature near the center of the tube. Besides, temperature value is considerably increased by changing smooth tube with deformed tube (square, sinusoidal and triangular tubes). Variation of the Nusselt number along the tube for different geometries without magnetic field (Fig. 13) also confirm this finding.

Radial distribution of the temperature (a) simple, (b) sinusoidal, (c) triangular, (d) square tube in presence of different magnetic fields.

Comparison of Nusselt number along the tube without magnetic field.

Heat transfer performance of the selected geometries are compared in Fig. 14. The variation of average Nusselt number for these configurations indicates that the triangular tube has is more efficient than other configurations. Average Nusselt Number of this model is 15% more than smooth tube.

Evaluation of average Nusselt number for different types of tube walls.

In the present work, the influence of the tube profile on the heat transfer performance of the nanofluid flow inside the inner tube with existence of non- uniform magnetic field is fully investigated. This research tried to present the main mechanism of heat transfer by analysis of flow structure and boundary layer distribution inside the tube. For simulation of the nanofluid flow, computational technique is used by solving RANS equations with additional source term associated with the magnetic field of wire. Due to non-uniformity of the magnetic field, the addition of source term is done in both x and y direction. Effects of magnetic intensity and inflow velocity on the average and local Nusselt number are fully investigated. Three shapes of tube wall (sinusoidal, square and triangle) are investigated in this work. Our investigation shows that the production of the circulation inside the cavity of tube plays key role on the local heat transfer, Comparison of the shape of tube indicates that the thermal efficiency of the tube with triangular shape is more than other configurations and its performance is 15% more than smooth tube.

All data generated or analysed during this study are included in this published article.

Manh, T. D., Bahramkhoo, M., BarzegarGerdroodbary, M., Nam, N. D. & Tlili, I. Investigation of nanomaterial flow through non-parallel plates. J. Thermal Anal. Calorimetry 143, 1–9 (2020).

Google Scholar

Mokhtari, M., Hariri, S., BarzegarGerdroodbary, M. & Yeganeh, R. Effect of non-uniform magnetic field on heat transfer of swirling ferrofluid flow inside tube with twisted tapes. Chem. Eng. Process. Process Intensif. 117, 70–79 (2017).

Article CAS Google Scholar

Li, Y. et al. Three-dimensional DSMC simulation of thermal Knudsen force in micro gas actuator for mass analysis of gas mixture. Measurement 160, 107848 (2020).

Article Google Scholar

Gerdroodbary, et al. The influence of non-uniform magnetic field on heat transfer intensification of ferrofluid inside a T-junction. Chem. Eng. Process. Process Intensif. 123, 58–66 (2018).

Article Google Scholar

Liu, X. et al. Numerical simulation of the hydrogen mixing in downstream of lobe strut at supersonic flow. Int. J. Hydrogen Energy 45(46), 25438–25451. https://doi.org/10.1016/j.ijhydene.2020.06.130 (2020).

Article CAS Google Scholar

Sheikholeslami, M., BarzegarGerdroodbary, M., Moradi, R., Shafee, A. & Li, Z. Application of neural network for estimation of heat transfer treatment of Al2O3-H2O nanofluid through a channel. Comput. Methods Appl. Mech. Eng. 344, 1–12 (2019).

Article ADS Google Scholar

Sheikholeslami, M., Farshad, S. A., Shafee, A. & Babazadeh, H. Performance of solar collector with turbulator involving nanomaterial turbulent regime. Renew. Energy 163(1222), 1237 (2020).

Google Scholar

Sheikholeslami, M., Jafaryar, M., BarzegarGerdroodbary, M. & Alavi, A. H. Influence of novel turbulator on efficiency of solar collector system. Environ. Technol. Innov. 26, 102383 (2022).

Article CAS Google Scholar

Hassanvand, A., Moghaddam, M. S., BarzegarGerdroodbary, M. & Amini, Y. Analytical study of heat and mass transfer in axisymmetric unsteady flow by ADM method. J. Comput. Appl. Res. Mech. Eng. (JCARME) 11, 151–163 (2019).

Google Scholar

Hariri, S., Mokhtari, M., BarzegarGerdroodbary, M. & Fallah, K. Numerical investigation of the heat transfer of a ferrofluid inside a tube in the presence of a non-uniform magnetic field. Eur. Phys. J. Plus 132(2), 1–14 (2017).

Article CAS Google Scholar

Sheikholeslami, M., Farshad, S. A., BarzegarGerdroodbary, M. & Alavi, A. H. Impact of new multiple twisted tapes on treatment of solar heat exchanger. Eur. Phys. J. Plus 137(1), 86 (2022).

Article CAS Google Scholar

Sheikholeslami, M., BarzegarGerdroodbary, M., Shafee, A. & Tlili, I. Hybrid nanoparticles dispersion into water inside a porous wavy tank involving magnetic force. J. Thermal Anal. Calorimetry 141(5), 1993–1999 (2020).

Article CAS Google Scholar

Manh, T. D. et al. Computational simulation of variable magnetic force on heat characteristics of backward-facing step flow. J. Thermal Anal. Calorimetry 144, 1–12 (2020).

Google Scholar

Tlili, I., Moradi, R. & BarzegarGerdroodbary, M. Transient nanofluid squeezing cooling process using aluminum oxide nanoparticle. Int. J. Mod. Phys. C 30(11), 1950078 (2019).

Article ADS CAS Google Scholar

Sheikholeslami, M. et al. Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach. Appl. Therm. Eng. 2020, 115935 (2020).

Google Scholar

BarzegarGerdroodbary, M. Application of neural network on heat transfer enhancement of magnetohydrodynamic nanofluid. Heat Transf. Asian Res. 49(1), 197–212 (2020).

Article Google Scholar

Nguyen, T. K. et al. Influence of various shapes of CuO nanomaterial on nanofluid forced convection within a sinusoidal channel with obstacles. Chem. Eng. Res. Des. 146(2019), 478–485 (2019).

Article CAS Google Scholar

Sheikholeslami, M., Farshad, S. A., Shafee, A. & Babazadeh, H. Influence of Al2O3 nano powder on performance of solar collector considering turbulent flow. Adv. Powder Technol. 2020(31), 9 (2020).

Google Scholar

Sheikholeslami, M., BarzegarGerdroodbary, M., Moradi, R., Shafee, A. & Li, Z. Numerical mesoscopic method for transportation of H2O-based nanofluid through a porous channel considering Lorentz forces. Int. J. Mod. Phys. C 30(2019), 1950007 (2019).

Article ADS CAS Google Scholar

Buschow, K. H. J. Handbook of Magnetic Materials (Elsevier, 2003).

Google Scholar

Pak, B. C. & Cho, Y. I. Hydrodynamic and heat transfer study of dispersed fluid with submicron metallic oxide particle. Exp. Heat Transf. 11(2), 151–170 (1998).

Article ADS CAS Google Scholar

Sadeghi, A., Amini, Y., Saidi, M. H. & Chakraborty, S. Numerical modeling of surface reaction kinetics in electrokinetically actuated microfluidic devices. Anal. Chim. Acta 838, 64–75 (2014).

Article CAS Google Scholar

Sadeghi, A., Amini, Y., Saidi, M. H. & Yavari, H. Shear-rate-dependent rheology effects on mass transport and surface reactions in biomicrofluidic devices. AIChE J. 61(6), 1912–1924 (2015).

Article CAS Google Scholar

Huang, K., Su, B., Li, T., Ke, H. & LinWang, M. Q. Numerical simulation of the mixing behaviour of hot and cold fluids in the rectangular T-junction with/without an impeller. Appl. Therm. Eng. 204, 117942. https://doi.org/10.1016/j.applthermaleng.2021.117942 (2022).

Article Google Scholar

Guo, Z., Tian, X., Wu, Z., Yang, J. & Wang, Q. Heat transfer of granular flow around aligned tube bank in moving bed: Experimental study and theoretical prediction by thermal resistance model. Energy Convers. Manag. 257, 115435. https://doi.org/10.1016/j.enconman.2022.115435 (2022).

Article Google Scholar

Cui, W. et al. Heat transfer analysis of phase change material composited with metal foam-fin hybrid structure in inclination container by numerical simulation and artificial neural network. Energy Rep. 8, 10203–10218. https://doi.org/10.1016/j.egyr.2022.07.178 (2022).

Article Google Scholar

Qu, M., Liang, T., Hou, J., Liu, Z. & YangLiu, E. X. Laboratory study and field application of amphiphilic molybdenum disulfide nanosheets for enhanced oil recovery. J. Petrol. Sci. Eng. 208, 109695. https://doi.org/10.1016/j.petrol.2021.109695 (2022).

Article CAS Google Scholar

Isanejad, M. & Fallah, K. Numerical study of droplet breakup in an asymmetric T-junction microchannel with different cross-section ratios. Int. J. Mod. Phys. C 33(02), 2250023 (2022).

Article ADS MathSciNet CAS Google Scholar

Fallah, K. & Fattahi, E. Splitting of droplet with different sizes inside a symmetric T-junction microchannel using an electric field. Sci. Rep. 12(1), 1–12 (2022).

Article Google Scholar

Allahyari, S. et al. Investigating the effects of nanoparticles mean diameter on laminar mixed convection of a nanofluid through an inclined tube with circumferentially nonuniform heat flux. J. Eng. Thermophys. 25(4), 563–575 (2016).

Article CAS Google Scholar

Fallah, K., Rahni, M. T., Mohammadzadeh, A. & Najafi, M. Drop formation in cross-junction microchannel, using lattice Boltzmann method. Therm. Sci. 22(2), 909–919 (2018).

Article Google Scholar

Sheidani, A., Salavatidezfouli, S. & Schito, P. Study on the effect of raindrops on the dynamic stall of a NACA-0012 airfoil. J. Braz. Soc. Mech. Sci. Eng. 44(5), 1–15 (2022).

Article Google Scholar

Bakhshaei, K., Maryamnegari, H. M., Dezfouli, S. S., Khoshnood, A. M. & Fathali, M. Multi-physics simulation of an insect with flapping wings. Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng. 235(10), 1318–1339 (2021).

Article Google Scholar

Ghazanfari, V., Imani, M., Shadman, M. M., Zahakifa, F. & Amini, Y. Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles. Prog. Nucl. Energy 155, 104526 (2023).

Article CAS Google Scholar

Heydari, A., Alborzi, Z. S., Amini, Y. & Hassanvand, A. Configuration optimization of a renewable hybrid system including biogas generator, photovoltaic panel and wind turbine: Particle swarm optimization and genetic algorithms. Int. J. Mod. Phys. C 8, 1–18 (2022).

Google Scholar

Amini, Y. & Esfahany, M. N. CFD simulation of the structured packings: A review. Sep. Sci. Technol. 54(15), 2536–2554 (2019).

Article CAS Google Scholar

Amini, Y., BarzegarGerdroodbary, M., Pishvaie, M. R., Moradi, R. & MahruzMonfared, S. Optimal control of batch cooling crystallizers by using genetic algorithm. Case Stud. Therm. Eng. 8, 300–310 (2016).

Article Google Scholar

Moradi, R., Monfared, S. M., Amini, Y. & Dastbaz, A. Vacuum enhanced membrane distillation for trace contaminant removal of heavy metals from water by electrospun PVDF/TiO2 hybrid membranes. Korean J. Chem. Eng. 33(7), 2160–2168 (2016).

Article CAS Google Scholar

Amini, Y., Mokhtari, M., Haghshenasfard, M. & BarzegarGerdroodbary, M. Heat transfer of swirling impinging jets ejected from nozzles with twisted tapes utilizing CFD technique. Case Stud. Therm. Eng. 6, 104–115 (2015).

Article Google Scholar

Mokhtari, M. & Hariri, S. Intensification of heat transfer rate in a rectangular channel equipped with pins, using non-uniform magnetic field. J. Nanofluids 8(5), 1041–1050 (2019).

Article Google Scholar

Kim, D. et al. Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions. Curr. Appl. Phys. 9, e119–e123 (2009).

Article ADS Google Scholar

He, Y., Men, Y., Zhao, Y., Huilin, Lu. & Ding, Y. Numerical investigation into the convective heat transfer of TiO2 nanofluids flowing through a straight tube under the laminar flow conditions. J. Appl. Therm. Eng. 29, 1965–1972 (2009).

Article CAS Google Scholar

Download references

Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran

Y. Azizi, M. Bahramkhoo & A. Kazemi

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

Y.A. and M.B. wrote the main manuscript text and A.K. prepared figures. All authors reviewed the manuscript.

Correspondence to M. Bahramkhoo.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Azizi, Y., Bahramkhoo, M. & Kazemi, A. Influence of non-uniform magnetic field on the thermal efficiency hydrodynamic characteristics of nanofluid in double pipe heat exchanger. Sci Rep 13, 407 (2023). https://doi.org/10.1038/s41598-022-26285-w

Download citation

Received: 16 October 2022

Accepted: 13 December 2022

Published: 09 January 2023

DOI: https://doi.org/10.1038/s41598-022-26285-w

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.